Menu Close
  • The Dremel 4300 is the first Dremel rotary tool to allow tool-less and collet-less accessory changes with the inclusion of the three-jaw chuck. The chuck accepts all Dremel accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all-new pivot light, your projects are well-lit with an optimum line of sight since the light pivots to direct illumination where you want it. Experiencing the full range of Dremel rotary tool applications is easier than ever because the 4300 offers our most powerful motor with built-in variable speed and electronic feedback circuitry. And the slim, ergonomic body design provides a comfortable 360-degree grip zone No matter how you hold it for extended ease of use. The completely redesigned airflow system lets the Dremel 4300 run cool, quiet, and smooth so completing projects are more enjoyable than ever.

  • The DREMEL 4000 variable-speed rotary tool kit offers the highest performance and most versatility of all DREMEL rotary tools. The increased strength of its motor and electronic feedback circuitry enables consistent performance at all speed levels. Ergonomics include a slim design that provides a 360-degree grip zone for added comfort and control. The DREMEL 4000 can use all existing DREMEL rotary tool accessories and attachments, as well as high-performance attachments, so you can do more with just one tool. Two year warranty.

  • 3-in-1 tool: It’s a drill press, rotary tool holder, and flex-shaft tool stand. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches.

  • This flex shaft is the perfect addition for your Rotary Tool. Quick connect – easily attaches to your Dremel rotary tool. If you’re a DIY-er, hobbyist or craft worker turn your rotary tool into a grinder with this flexible shaft attachment. Rotary tools are incredibly versatile and this accessory gives you even more functions. Plus, the flex rubber non-slip shaft lets you take really control over the job in hand.

  • Dremel Brad Points Bit Standard

    Build drawers, cabinets and other DIY projects around home with ease with the Dremel 631 Brad Point Bits as it can drill wood accurately. Compatible with all Dremel rotary tools, these point bits are titanium coated that stay on center and begin drilling immediately. Easy and simple to use, the Dremel 631 Brad Point Bits is your solution for home improvements.

  • Bits made of high speed steel. Sizes include 1/32-, 3/64-, 1/16-, 5/64-, 3/32-, 7/64-, and 1/8-inch.

  • These premium Chrome Vanadium brad point wood twist drills are designed for maximum performance, the optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled. Additionally, a beveled edge leads to a perfect drilling of the diameter without any deviation they are ideal for doweling and other precision hole boring. You’ll get a clean cut without tear-out. For use in soft, hard, exotic, veneered, laminated and plywood, as well as MDF and even acrylic glass. Made in Austria.

  • Speed Tip Reduces Walking Ideal for drilling in metal, wood, and plastics No spin shanks Includes tough case container to keep bits organized Titanium Coating for Longer Life

  • Food Grade – Safe for use on wood and bamboo cutting boards, countertops, utensils, salad bowls and wood products Pure USP Mineral Oil – Highest quality white mineral oil for food contact with tamper seal, unlike lower quality bulk mineral oil for non-food use Restores and Protects Wood – Hydrates, seals and penetrates deeply into wood to protect from water to prevent cracking and drying. Great for granite, soapstone, knives, garden equipment and more! Easy to Use – Push applicator cap and easy squeeze bottle makes maintenance a breeze

  • For general wood, soft metal, aluminum, acrylic plate, PCB, in applications such as routine maintenance, repair work and for re-threading.

  • The portable V-Drill Guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts! Heat treated for durability. Side alignment marks allow accurate hole locating. 21 Drill Sizes: #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64″. Covers all tap drill sizes from 10/32 down to 0-80. Lifetime Warranty. Made in U.S.A. Drill Straight – Every Time!

  • A portable drill guide for use almost anywhere. With the Milescraft DrillMate portable drill stand, you can drill straight holes, angled holes, on the edge of a board or even round stock. Everyone knows that the success of many DIY projects depends on drilling straight and accurate holes. Now you can add a whole new level of accuracy with this drill guide jig when drilling holes with your standard hand drill.

  • WEN 4214 12-Inch Variable Speed Drill Press Orange

    Infinitely variable speed ranges from 580–3200 RPM. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed. Spindle Travel of 3-1/8″ with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III 9-1/2 x 9-1/2″ cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2″ Includes drill press, mechanical variable speed, laser, table roller extension, 5/8″ keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

  • Great for Cutting, Grinding, Polishing, Sharpening and Drilling Spindle Lock for Easy Collet Changes 1mm, 3mm, 3/32 in., 1/8 in. Collets 16000 RPM

  • Forney 20858 Cutting Fluid Industrial Pro Tap Magic 16-Ounces

    Spray cutting fluid Excellent for tapping, threading, drilling and reaming Use on ferrous metals and non-ferrous alloys Spray directly on the work surface Spray will not run

  • Fits model 275, 285, 395, 398; 100, 200, 300 and 400 Series; 3000, 4000, 4200, 8200 and 8220 Quickly converts rotary tool to plunge router; plunge lock-in handle; 2 depth stops for rapid depth adjustments Plastic and metal construction Includes plunge router attachment, edge guide, circle cutting guide, mounting wrench, manual

  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools

  • It accepts all accessory bits with 1/32 to 1/8 inch shanks. It allows you quickly and easily change accessory on rotary tool without changing collets, save time and highly improve your work efficiency. Not only suitable for rotary tool models 275, 285, 398; Also suitable for models 750, 770 and 781 Widely used on rotary tool models 4000, 400, 3000, 398, 300, 285, 275, 200, 100, 8220, 8200, 800, 780, 770, 7700, 750

  • Dremel 1/4 Shank Chuck Collet Adapter For 1/8 Rotary Tools

    Extra LARGE keyless chuck that is usable on many Dremel devices. MANY people have asked me for something like this. In fact, even a few customers have mistakenly bought my Dremel Adapter thinking it would do what this device does. I know I offer a tool to run Dremel bits on your 1/4 inch power tools such as air and battery powered die grinders; but I’ve had over a dozen people ask me if I make or can I make a device to run 1/4 inch bits on the Dremel. Well here it is.   The Mega Chuck is like the chuck that Dremel offers; but bigger. The Mega Chuck allows you to swap between quarter inch tools to regular 1/8th inch Dremel tools; and every size in between and smaller.

  • Sharp and durable, the cutting edge strength is good. Small resistance, smooth chip removal, smooth cutting surface, no residue, with good machinability, it can be tapped to the button of the blind hole. Flexible to be used, processing efficiency, good stability, safe and reliable, widely used, low processing cost can be applied to a variety of jobs. Wrench Length: 60mm/2.36” Metric Taps Set Size: M3/M4/M5/M6 Drill Bits Size: 2.5/3.5/4.0/5.0mm

  • 1x Slot cutter Diameter 3.2mm 1x Slot cutter Diameter 5.0mm 1x Slot cutter Diameter 6.5mm 1x Rounding over cutter Diameter 6.4mm 1x V-Slot cutter Diameter 6.5mm 1x Combi cutter 6.5/2.5mm 1x Core box bit 3.2mm radius 1x Rebating cutter 6.4mm 1x Edge cutter with pin Diameter 5.0mm 1x Half round cutter Diameter 13mm

  • Non-Spray cutting fluid Use for tapping, threading, drilling and reaming Use on ferrous metals and non-ferrous alloys Apply directly on the work surface

  • Flat and sharp cutting edge makes very flat fret end.

  • Designed in house, our custom-made steel cutter has improved features you won’t find on hardware store nippers. The jaws are specially hardened for fret work, and they’re profiled and flush-ground to cut the wire close to the fretboard. The result is a cleaner cut without pulling the wire, so you’ll need less filing.

  • End Cut, Flush Nipper Medium For Trimming Fret wire flush to neck and also many other shop uses. Medium size, fits very nicely into the palm of your hand. Quality Tool Steel Blade

  • Cuts brad nails with ease Cuts Edge banding flush to the edge Easy to sharpen

  • Compound action design for increased cutting force Multi-zone bi-material grips for comfort and control. Induction Hardened cutting edges stay sharper longer. Drop forged steel for strength and durability.

  • Basic Knife Set The X-ACTO precision knife is the original cutting tool for any application requiring a precise, accurate cut. This cutting and trimming tool has been used for years by graphics artists, designers, hobbyists and others for making careful cuts and trims consistently and with confidence. The X-ACTO precision knives are built with carbon and steel sharpened blades for a reliable cut every time. Add a full set of X-ACTO precision knife blades, you will have a knife to make the precision cut you need – every material, every time.

  • Perfect tool for light chiseling, and shapping a range of different materials with a super sharp narrow blade that allows you to make a more skillful cut than your traditional chisel blade

  • Acrux7 provides 3 type blades for different needs. These tools are available for deburring cross holes, deep holes, straight edges, curved edges. HSS blades could efficiently remove burr for plastic, PVC, copper, aluminum and other soft metal. Cobalt added HSS blades are strong enough for stainless steel. It is easy to install blade by compressing the mounting head. The installed blade could be flexibly 360 degree rotated. It is very sharp and easy for burr removing. Please be careful and make it away from the kids.

  • Designed for light stock removal and high luster polishing Works on a variety of surfaces including steel, aluminum, brass, silver, hard plastics, gold and other metals Impregnated with silicone abrasive and lubricant Eliminates the need for polishing compound

  • Sanding Sponge Blocks is great for sanding odd shapes, edges and into grooves. High-density durable sponge inside, solid and no easy to break, also resistant to water, wear, acid and alkali.

  • 600 Grit Sandpaper

    Good quality sandpaper: Sandpaper sheets are made of grit silicone carbide Two sheets of each grit: 400/600/800/1000/1200/1500 Compact size: size of each sandpaper sheet are cut into 9 x 3.6 inch Variety applications: perfect for furniture finishes, polishing of plastic and glass, etc Can be applied in many environment: use with water, varnish, shellac, lacquer, or oil

  • Highly abrasive Waterproof Made of silicon carbide Can be used wet or dry Each sheet is 9″ x 11″

  • Silicon carbide abrasive, a sharp synthetic mineral that cuts fast and smooth Use with water or cutting oil to reduce clogging and extend abrasive life Offered in two weights of waterproof paper to suit your specific sanding needs; flexible “A” weight backing for contour sanding and durable “C” weight backing for improved stock removal and leveling general surfaces

  • Turn your power rotary tool into high-speed buffing machine. Ideal for polishing and buffing on plastics, metals, jewelry and other small parts. Used primarily with polishing bits and accessories.

  • Material: high quality wool, metal 12 Pieces bullet shaped grinding heads (diameter: 4 mm/ 5 mm/ 6 mm/ 8 mm/ 10 mm/ 12 mm) 12 Pieces cylinder shaped grinding heads (diameter: 4 mm/ 5 mm/ 6 mm/ 8 mm/ 10 mm/ 12 mm) Univeral shank diameter: 3mm

  • Step 1 is a beautiful medium blue 240 grit, Step 2 is a pink 320 grit, Step 3 is a white 1000 grit and Step 4 is the grey 3000 shiner grit.

  • Made of silicon carbide and electro coated, ensures the grit distributed evenly, good for wet or dry sanding.

  • Polishing tips are made of special rubber and mixed abrasive machining, metal processing, non-metallic parts and handicrafts, such as can choose according to different machining parts strop stone shape. Polishing rubber heads can be grinding head grinding and polishing, and mixed burn the workpiece, can quickly and high precision cast any original rough surface after machining, grinding was processed workpiece roughness ultimately achieve grade 9.

  • Interior material made of dense sponge covered on all 4 sides with the sanding surface.

  • Universal Pistol Rear Sight Tool designed for: Removal, Installation, and Adjusting windage of dovetailed rear sights for most Semi-Auto Pistol slides. The Universal Pistol Rear Sight Tool works with many types of semi-auto slides: full, compact, sub compact, and pocket sized semi-auto pistols.

  • Four Dedicated Tools Sets The right hammer and the right pin punch are a must-have on your workbench. Driving out small pins to perform routine takedown, cleaning, maintenance, customization, repair or upgrade is like bread and butter. When dealing with small, crucial parts it’s all about precision and accuracy: remove the pin without causing damage. Perform maintenance without scratching or marring the finish. That’s how our specialized Accu-Punch Hammer & Punches set paired up with Smart Bench Block makes an essential combo. Bench block provides you extra layer of stability and protection and allows you to work comfortably and confidently.

  • Professional Quality:Made of high quality carbon steel Great for doing detail work

  • Great for cleaning and restoring CD/DVD, motorcycle windshields, automobile headlamps, boats, airplanes, aquariums and all acrylic products Compact kit that fits in your glove compartment, saddle bag or carrying case Cleans and removes scratches instead of filling it in

  • Removes surface scratches, swirl marks, haze Also use for removing bugs, tar, and oxidation

  • Pliers Include: Linesman, Diagonal, Long Nose, End Cutting, Flat Compact Size: With how small these are, you can fit these into tight spaces. This is useful for your electrical applications in tight areas, especially if you need to do delicate operations like pulling wire through conduit

  • Ultra soft, non-abrasive microfiber cloths will not scratch paints, coats or other surfaces Cleans with or without chemical cleaners, leaves lint and streak free results Absorbs eight times its own weight

  • Apply with a clean cloth and a little elbow grease for a great shine Gentle enough to use on a regular basis

  • Use to smooth jagged edges, protrusions and raised particles from contoured areas Use a utility knife to tailor shape them Re-usable and last a very long time Used for metal and wood finishing

  • 2000 grit sandpaper with uniform grit particles leaves a smooth, even sanding pattern that buffs out in seconds The smooth sanding pattern eliminates the risk of deep, uneven sanding scratches that require compounds to remove Waterproof and safe to use on all paint finishes and clear coats  

  • Moves easily in tight spaces and into corners making it perfect for your detail sanding needs Comfortable grip that molds to the shape of your finger The quick change hook and loop base makes it easy to change sandpaper grits Resists clogging and loading Resists heat and humidity

  • Creates a rich darkness and shine that lasts for weeks and withstands washing and rain Breakthrough clear coat UV protection provides outstanding, durable protection that helps prevent aging

  • Pack of 100 Pieces rotary tool accessories, including 50pcs cylinder shaped grinding heads and 50pcs bullet shaped, different sizes of heads

  • Perfect accessory to sand, shape, groove, finish soft, hard woods, fiberglass and more

  • Set of eight 5-1/4″ x 3/4″ x 1/8″ thick sticks includes one each 400, 600, 800, 1000, 2000, 3000, 5000 and 7000 grit. Use wet or dry. Each stick is double-sided for twice the life, with a semi-flexible plastic backbone in the middle for a firm grip and added pressure when working in confined areas.

  • Has the industrial strength cleaning power to protect and polish metal, plastic, fiberglass, aluminum and chrome.

  • Diamond grindstone, coarse grinding and fine grinding combined. Design highlights product texture. More efficiency and durability are less risky than waterstones damage margins.

  • Impeller: 3x12mm, 5pcs; 3x15mm, 5pcs; connecting rod, 1pc Grinding burr: cylindrical shape: 3x6mm, 3x8mm, 5pcs for each; rounded cylinder: 3x6mm, 3x8mm, 2pcs for each (Grit 60) T shape E needle burr: 3x6mm, 4pcs (Grit 60) Fine sand shape burr: 3x6mm 6pcs; Needle: 2pcs (Grit 150) Diamond Disk: 20mm 2pcs; 30mm 2pcs, with 2pcs connecting rods. Great for filing glass, ceramics, tile, brick, fiberglass, stone, rock carbide, gold, platinum, silver, metals, and anything with a hard surface. Also fit and easy to install on Dremel rotary tools 4000, 4200, 8220, 3000

  • Includes 360 Pieces Nail Sanding Band Sleeves and 24 Pieces Drum Mandrels

  • High-quality emery Sharp and wear-resistant Grinding smoothly Grit is uniform and fine, durable, suitable for precision grinding

  • 50 Assorted Heads,small head style,diamond coated rotary burrs Shank Size: 1/8-inch,Grit: 120 Various shapes included, such as spheres, cylinders, bullets, needles etc. Designed for Rotary Tools,Plastic box packaging, easy to store and carry Great for Working with Ceramics, Tile, Stone, Glass, Metal & More

  • The 54pc Rubber Abrasive Rotary Set is a complete hobby tool with assorted shape and grit pieces all for a 1/8″ Shank. This set comes with 80 grit, 240 grit, and 600 grit sets. The set also includes a storage container to keep all the tiny pieces secure and safe. This set is great for polishing ferrous metals, stones, glass, ceramic, and more. Be sure to have it with you during your next rotary project!

  • Tool designed in a pen configuration with a steel disassembly and front sight tool . Anodized blue aluminum pen tool with two threaded caps that thread into the center body, with a black steel pocket clip. Hardened steel 3/32″ or 2.5mm punch tool for all . Designed to remove the pins and disassemble the Glock® frame, slide, and the magazine into their individual components. The opposite end of the tool includes a 3/16″ hex nut driver for removing/installing factory and aftermarket Glock® front sights. The 3/16″ hex nut driver features an internal magnet to conveniently hold the front sight screw as you install the front sight post. The pointed cap can be used to center the pins in the frame. Pointed cap can be screwed onto the pocket clip cap to prevent losing it when the tool is in use.

  • Sight Installation Tool for Glock Angled MGW309 Designed to push the rear sight and not mar the handgun. For factory or aftermarket rear sights with angled sides only. This tool is designed to work on both the smaller 9mm and .40 caliber slides as well as the larger .45 caliber and 10mm slides. You MUST remove the shim for larger sizes.

  • Easily removes / installs Glock and Walther front sights All-steel construction with FORTRESS FINISH

  • The kit includes the following: Punch Liner extraction tool Liner installation tool Phillips and slotted screw driver

  • Precisely sized, chamfered, straight ends offer a snug fit and insert smoothly into fastener head, reducing wear Black oxide finish protects against corrosion without added plating that could chip off under high-stress contact Long arm/short arm design offers extended reach on one end and extra leverage on the other Hinged storage case opens flat, making it easier to get wrenches in and out Easy-to-read sizes marked on case for fast size selection

  • The Apex Armorer’s Block is designed for gunsmiths, law enforcement and military armorers and do-it-yourself home gunsmiths to work on Smith & Wesson M&P and Glock model pistols.

  • Accu-Punch Hammer & Standard Punchses set: array of punches with flat tips for driving solid pins Finely made, clearly marked, grip hex-handle punches to safely perform firearms maintenance, modification or repair Standard Steel Punches: 1/16″, 5/56″, 3/32″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″ Gunsmithing HAMMER for precision taps: ergonomic, rubberized grip and balanced weight to give both accurate control for tapping tiny pins and optimal power for tough pins

  • Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc Sturdy heavy-duty base prevents walking and wobbling during operation Features two separate dust ports for maximum vacuuming efficiency Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty

  • Wheeler Digital F.A.T Wrench brings even more precise torque settings to the handheld torque wrench market. This amazing digital handheld torque wrench lets you apply repeatable, accurate torque settings to your scope rings, bows and other screws. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved. The large range of 15-100 in/lbs. will aid in accuracy of all your screws and decreases the opportunity for problems in the field. The F.A.T. Wrench bits are built to last and are made from S2 tool steel and hardened to 56-56 Rockwell “C”

  • Easily remove and install channel liners in all Glock models Cross drilled so a small rod can be inserted if the channel liner is hard to remove. Fits most models of Glock

  • Capacity–up to 50lbs, sensitivity–0.1oz(0-25lb), 0.2oz(25-50lb), reading modes–pounds/ounces, ounces, kilograms/grams, grams Key functions–tare(allow you to reset the display to 0.0), hold (especially for weighing a over-sized item)

  • 20x more accurate than common spring gauges Displays exact trigger pull weight Works with almost any rifle, shotgun, or handgun Telescoping trigger pull rod slides into housing for a compact, easy to storage package Ergonomic design positions the Gauge close to stocks for accurate readings Accurate to 1/10 of an ounce over its full weighing capacity Equipped with a large and easy to read digital display

  • THREE MEASURING MODES: one button quick change between three measuring modes: inch, fractions, millimeter PRECISION | ACCURACY: Measurement Range: 0 – 6” and 0 – 150mm; Resolution: 0.0005” / 1/128” / 0.01mm; Accuracy: 0.001” / 0.02mm STAINLESS STEEL: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use

  • MTM GV-30 Gun Vise Cleaning Maintenance Center

    Quick clamp up using a single cam activated lever for a secure non-marring hold Ideal for all Gunsmithing needs Room to organize cleaning supplies with various sized compartments for patches, screw driver bits, jags, brushes, solvents and cleaning rods Mounted on four skid-resistant rubber feet and is free-standing or can be bolted down Made in USA,  out of chemical and solvent resistant polypropylene plastic

  • Carving Expert 100 pcs Multifunctional Wool Felt Polishing Wheels Fit Dremel 1/8 Inch Shank

    Material: high-quality wool head. Application: works great for polishing, grinding. carving or gunsmithing, like jewelry, gemstones, glass, watches, crystal, car, motorcycle, bike, feed ramps or trigger jobs, etc. Best effect used with electric drills, grinders or Dremel rotary tools. Make your polished goods more cleaner and brighter. With 50 pcs Cylinder shaped grinding heads, and 50 pcs Tapered shaped, different sizes of them (Diameter: 10mm, 8mm, 6mm, 5mm, 4mm) 1/8 Inch Shank

  • Rear sight pusher will work with 90 degree and 30 degree rear sight profiles Both side witness windows tool frame to check sight alignment Sight Glock tool frame can be bolted to, clamped onto work surface, or clamped onto a work vice Heavy duty Blue Anodized aluminum frame with steel tools Fully adjustable

  • The most complete gunsmith and maintenance kit available! Includes 68 piece Gunsmith Tool Set Includes Lyman gun mat, Hammer and Punch Set, Roll Pin Punch Set, and Pick and Brush Set. Includes X-Block Includes Digital Trigger Pull Gauge Included Components: Pick & Brush Set

  • Rain Tactical and Cerus Gear have teamed up to bring you best possible cleaning mats you can buy on the market today. These Pro Cleaning mats have precision printed graphics, and are made in the USA from Top quality materials and backed with a Lifetime Warranty !

  • Glock disassembly tool Black finish The tool measures approximately 3 5/8” from end to end

  • Glock disassembly tool Black finish The tool measures approximately 3 5/8” from end to end

  • Magazine Base Plate Removal Tool 3/16″ Hex Thin Wall Nut Driver 3/32″ Takedown punch

  • This plate allows you to make adjustments without having to take the back plate off your gun every time. The plate is sectioned by 1/3 in height to permit viewing of the sear and firing pin engagement. This plate is slightly thicker in width than the OEM plate. This plate is made thicker in width because this thickness moves the firing pin leg slightly forward. Moving the firing pin leg effects where the trigger releases the firing pin. Moving it slightly forward gives you more adjustment of the Trigger Control Tab (TCT) once your thinner Glock black plate is reinstalled. More Adjustments may be required This plate is a virtual must for an easier error free installation of the EVO ELITE, ROCKET & TACTICAL. This is a Test Plate.

  • Pick and hook tool set includes 4 smaller hooks – 3 inch shafted straight auto pick, curved hook, 45-degree hook, and 90 degree pick tool with 3.5 inch grip handles (6.5 inch/16.5cm full length); Also includes 5 larger automotive picks – 6 inch shafted straight mechanic pick, curved hook, 45-degree hook, 90-degree right angle pick, and a 1” scraper tool with 4 inch grip handles (10inch/25.4cm full length).

  • This is a great tool for users of aftermarket Stainless Steel or Tungsten guide rods. This tool helps you easily change and swap out your guide rod spring for a new one, or a different weight spring depending on your shooting needs or style.

  • A great tool to have when you’re working on your GLOCK. The parts tray prevents the possibility of losing parts by holding everything in one, easy to locate, place. The no slip rubber bottom also prevents the tray from moving around on any surface.

  • Add this Glock perfection armorers apron in black to your collection. This versatile apron can be worn to clean your gun. Made out of 100% cotton, it has 2 pockets and it’s a great addition for any Glock enthusiast.

  • This Glock gun cleaning mat has a parts tray to keep you more organized than other Glock bench mats. Plus, it stores easy, protects your gun and table, and it has great graphics.

  • Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.

  • Package includes 6 orange rifle chamber flags Easy insertion and extraction Made from durable, long lasting HDPE Can be used on .22 and larger caliber rifles Required by Range Safety Officers to indicate the chamber is empty

  • Easily and safely remove flat magazine base plates from Gen 3 or 4 Glock Magazines (a/k/a clips) 100% Made in the USA Machined out a solid block of USA melt aircraft aluminum Black Anodized in the USA

  • 3 Acrylic Vials – plumb, level, and 45 degree provide the necessary jobsite measurements. Powerful magnetic strip hold firmly to iron and steel surfaces. Top read level window simplifies viewing in tight areas.Hang shelves and cabinets, tiles and picture frames with accuracy.

  • MULTI-PURPOSE USE: CREMAX 10 PCS screwdriver set is designed for domestic appliances, furniture, automotive, factory. They are capable of meeting your various needs STRONG MAGNETIC TIP: It attracts screws easily, and make it easy to take the screw out after unraveling. Blackening treatment prevents rust effectively.

  • Double ends allow for large surface scrubbing on one end and precision cleaning with the smaller end. This 11 Pack includes 10-Nylon All Purpose Brushes and 1-Blue Nylon All Purpose Brush. The nylon brushes are the least aggressive, meet Mil. Spec. and are safe for everyday use. Recommended for use on virtually any surface including wood surfaces

  • Medium to high strength threadlocker for general-purpose applications Prevents loosening due to vibration Removable with hand tools for easy disassembly

  • Simple design, Prevents over insertion and dispenses liquid or solution effortlessly Syringe holds up to 10mL of liquid/solution